CALCulate[1]|2|3|4:FEED[1]|2 <string>
This command sets the input measurement mode to be fed to the specified input
on the CALC block. It is applied to the measurement after the CALC:MATH:EXPR
command has been used to specify the measurement type for the feed.
Measurement modes are coupled for combination measurements (for example,
ratio measurements).
Syntax
Parameter
Item
string
Example
CALC:FEED1 "POW:AVER"
Keysight N432A Programming Guide
CALC
1
2
3
4
Description
The input measurement mode to be fed to the specific input on
the CALC block:
– AVER: average
A feed of "" (empty string) disables the CALC block and switches
off that display line.
:FEED
1
2
This command sets the input measurement mode
for feed 1 of the CALC1 block to average power.
CALCulate Subsystem
Space
string
?
Range of values
"POW:AVER"
4
217