Table of Contents
Advertisement
15
SYSTem Subsystem
SYSTem:COMMunicate:LAN:DHCP[:STATe] <boolean>
This command enables the dynamic host configuration protocol (DHCP).
Syntax
SYST
Example
SYST:COMM:LAN:DHCP ON
Query
SYSTem:COMMunicate:LAN:DHCP?
This query enters a 1 or 0 into the output buffer indicating whether the DHCP is
enabled or disabled.
– 1 is returned if DHCP is enabled.
– 0 is returned if DHCP is disabled.
Query example
SYST:COMM:LAN:DHCP?
442
:COMM
:LAN
Queries the current state of the DHCP.
:STAT
:DHCP
This command enables the DHCP.
Keysight N432A Programming Guide
Space
0|OFF
1|ON
?
Advertisement
Table of Contents
