Keysight N432A Programming Manual page 444

15 SYSTem Subsystem
SYSTem:COMMunicate:LAN:HNAMe <character_data>
This command sets the host name for the N432A.
The factory default setting of the host name is in this format:
A- + prod uct number + - + suffix 5 d igits of serial number
For example, A-N432A-00204
Syntax
SYST
Parameter
Item
character_data
Example
SYST:COMM:LAN:HNAM 'PowerMeter1'
Query
SYSTem:COMMunicate:LAN:HNAM?
The query returns the current setting of the LAN host name.
Query example
SYST:COMM:LAN:HNAM?
444
:COMM :LAN
Description
Character values of up to 15 characters
Space
:HNAM
This command sets the host name
to PowerMeter 1.
Queries the host name setting.
Keysight N432A Programming Guide
character_data
?
Range of values
Maximum of 15 characters