Keysight N432A Programming Manual page 409

STATus Subsystem 14
[:EVENt?]
This query returns a 16-bit decimal-weighted number representing the bits set in
the Event register of the SCPI register set you require to control. The return format
15
is <NR1> in the range of 0 to 32767 (2 –1). This query clears all bits in the register
to 0.
[:EVENt?] is the default command if the STATus commands are not
NOTE
accompanied by any of the status register set commands (:COND?, :ENAB, :NTR,
and :PTR).
Syntax
:EVEN ?
Keysight N432A Programming Guide 409