Keysight N432A Programming Manual page 281

FORMat[:READings][:DATA] <character_data>
This command sets the data format for transferring numeric information to either
ASCii or REAL:
– When the format type is ASCii, numeric data is output as ASCII bytes in the
– When the format type is REAL, numeric data is output as IEEE-754 64-bit
Syntax
Parameter
Item
character_data
Example
FORM REAL
Reset condition
On reset, the data format is set to ASCii.
Keysight N432A Programming Guide
<NR3> format.
floating point numbers in a definite-length block. The result is an 8-byte block
per number. Each complete block is terminated by a line feed character.
FORM :READ
Description/Defaul t
Data format for transferring data:
– ASCii
– REAL
This command sets the data format to REAL.
Space
:DATA
FORMat Subsystem
character_data
?
Range of values
ASCii
REAL
7
281