Keysight N432A Programming Manual page 474

16 TRIGger Subsystem
Reset condition
On reset (*RST), this command is set to OFF.
On preset (SYSTem:PRESet) and instrument power up, INITiate:CONTinuous is
set to ON.
Query
INITiate[1]:CONTinuous?
This query enters a 1 or 0 into the output buffer indicating which triggering type is
used:
– 1 is returned when there is continuous triggering.
– 0 is returned when there is only a single trigger.
Query example
INIT:CONT?
474
Queries whether the N432A is set for single or continuous
triggering.
Keysight N432A Programming Guide