Keysight N432A Programming Manual page 435

SYSTem:COMMunicate:LAN:AIP[:STATe] <boolean>
This command enables the auto IP protocol to dynamically assign the IP address
when connecting to the N432A in an isolated (non-site) LAN network (for
example, PC to N432A).
Syntax
SYST
Example
SYST:COMM:LAN:AIP ON
Query
SYSTem:COMMunicate:LAN:AIP?
This query enters a 1 or 0 into the output buffer indicating whether auto IP is
enabled or disabled.
– 1 is returned if auto IP is enabled
– 0 is returned if auto IP is disabled
Query example
SYST:COMM:LAN:AIP?
Keysight N432A Programming Guide
:LAN
:COMM
Queries the auto IP state.
:STAT
:AIP
This command enables auto IP.
SYSTem Subsystem
Space
0|OFF
1|ON
?
15
435