Keysight N432A Programming Manual page 386

13 SERVice Subsystem
SERVice:BIST:VCOM <boolean>
This command enables or disables the V
Syntax
Reset condition
On reset, the V
Example
SERV:BIST:VCOM OFF
Query
SERVice:BIST:VCOM?
This query enters a 1 or 0 into the output buffer indicating the status of the V
self-test:
– 1 is returned if the self-test is enabled.
– 0 is returned if the self-test is disabled.
Query example
SERV:BIST:VCOM?
386
SERV :BIST
self-test is enabled.
COMP
COMP
Space
:VCOM
This command disables the V
Queries whether the V
disabled.
self-test.
0|OFF
1|ON
?
self-test.
COMP
self-test is enabled or
COMP
Keysight N432A Programming Guide
COMP