Keysight N432A Programming Manual page 329

OUTPut:RECorder[1]:FEED <data_handle>
This command determines which measurement is sent to the recorder output.
Syntax
Parameter
Item
data_handle
Example
OUTP:REC:FEED "CALC1"
Reset condition
On reset, data_handle is set to its previous value.
Keysight N432A Programming Guide
OUTP :REC
Description/Defaul t
The CALC block specifying the measurement to
be sent to the recorder output
:FEED
1
This command sends the CALC1
measurement to the recorder output.
OUTPut Subsystem
Space data_handle
?
Range of values
"CALC1" or "CALC"
"CALC2"
"CALC3"
"CALC4"
11
329