Keysight N432A Programming Manual page 366

Thermistor power meter

Hide thumbs Also See for N432A:

Table of Contents

SENSe Subsystem

[SENSe[1]]|2|3|4:CORRection:DCYCle|GAIN3 Commands

These commands control the pulse power measurement feature of the N432A.

The following commands are detailed in this section:

[SENSe[1]:]CORRection:DCYCle|GAIN3[:INPut][:MAGNitude]

<numeric_value>

[SENSe[1]:]CORRection:DCYCle|GAIN3:STATe <boolean>

You can use either DCYCLe or GAIN3 in these commands; both perform the same

function. Using GAIN3 complies with the SCPI standard whereas DCYCle does not

but it may make your program more understandable.

Keysight N432A Programming Guide