Operation Status Registers Sets
The following register sets contain information which is part of the N432A normal
operation. The contents of the individual registers of these register sets can be
accessed by appending the commands listed in
The six operation status register sets are:
STATUS:OPERation
STATus:OPERation:CALibrating[:SUMMary]
STATus:OPERation:LLFail[:SUMMary]
STATus:OPERation:MEASuring[:SUMMary]
STATus:OPERation:TRIGger[:SUMMary]
STATus:OPERation:ULFail[:SUMMary]
Further information on these register sets is provided on the following pages.
Keysight N432A Programming Guide
STATus Subsystem
Status Register Set
Commands.
14
415