Keysight N432A Programming Manual page 135

*TRG
The *TRG (TRiGger) command triggers channel A when it is in the wait-for-trigger
state, and only if the bus trigger source is currently selected. The *TRG command
has the same effect as a Group Execute Trigger (GET).
Using the *DDT command may change the function of the *TRG command.
Syntax
Example
*TRG
Error message
If TRIGger:SOURce is not set to BUS, or the N432A is not in the wait-for-trigger
state, error –211,"Trigger ignored" occurs.
Keysight N432A Programming Guide
*TRG
Triggers channel A that is in the wait-for-trigger state.
IEEE-488 Command Reference 2
135