[SENSe[1]:]CORRection Commands
These commands provide for changes to be applied to the measurement result.
They are used to enter duty cycle values, calibration factors and other external
gains and losses.
The following commands are detailed in this section:
[SENSe[1]:]CORRection:CFACtor|GAIN[1][:INPut][:MAGNitude]
<numeric_value>
[SENSe[1]:]CORRection:CSET[1]|CSET2[:SELect] <string>
[SENSe[1]:]CORRection:CSET[1]|CSET2:STATe <boolean>
[SENSe[1]:]CORRection:DCYCle|GAIN3[:INPut][:MAGNitude]
<numeric_value>
[SENSe[1]:]CORRection:DCYCle|GAIN3:STATe <boolean>
[SENSe[1]:]CORRection:FDOFfset|GAIN4[:INPut][:MAGNitude]?
[SENSe[1]:]CORRection:FDOFfset:UNIT <character_data>
[SENSe[1]:]CORRection:GAIN2:STATe <boolean>
[SENSe[1]:]CORRection:GAIN2[:INPut][:MAGNitude] <numeric_value>
Keysight N432A Programming Guide
SENSe Subsystem
12
353