Table of Contents
Advertisement
12
SENSe Subsystem
[SENSe[1]:]CORRection:CFACtor|GAIN[1][:INPut][:MAGNitude]
<numeric_value>
This command is used to enter a gain correction value for the calibration factor.
The N432A corrects every measurement by this factor to compensate for the gain.
Either CFACtor or GAIN1 can be used in the command; both have an identical
result. Using GAIN1 complies with the SCPI standard, whereas CFACtor does not;
this may make your program easier to understand.
Syntax
SENS
1
Parameter
Item
numeric_value
[a] For example, a gain of 60% corresponds to a multiplier of 0.6 and a gain of 150% corresponds to a multiplier of
354
:
CORR
Description/Defaul t
A numeric value for CFACtor or GAIN1
– DEF: The default value is 100%
– MIN: 1%
– MAX: 150%
1.5.
:GAIN
1
:CFAC
Space
?
:INP
:MAGN
numeric_value
DEF
MIN
MAX
Space
MIN
MAX
Range of values
1 to 150 PCT
DEF
MIN
MAX
Keysight N432A Programming Guide
[a]
Advertisement
Table of Contents
