Keysight N432A Programming Manual page 337

OUTPut:RECorder[1]:STATe <boolean>
This command enables or disables the recorder output.
Syntax
Example
OUTP:REC:STAT 1
Reset condition
On reset, the recorder output is disabled.
Query
OUTPut:RECorder[1]:STATe?
This query enters a 1 or 0 into the output buffer indicating whether the recorder
output is enabled or disabled:
– 1 is returned when the recorder output is turned ON.
– 0 is returned when the recorder output is turned OFF.
Query example
OUTP:REC:STAT?
Keysight N432A Programming Guide
OUTP
:REC
:STAT
1
This command enables the recorder output.
Queries the status of the recorder output.
OUTPut Subsystem
Space
0|OFF
1|ON
?
11
337