Keysight N432A Thermistor Power Meter
Programming Guide
11
OUTPut Subsystem
This chapter explains how the OUTPut command subsystem is used to configure
the N432A recorder and POWER REF outputs.
OUTPut Subsystem
OUTPut:RECorder[1]:FEED <data_handle>
OUTPut:RECorder[1]:LIMit:AUTO <boolean>
OUTPut:RECorder[1]:LIMit:LOWer <numeric_value>
OUTPut:RECorder[1]:LIMit:UPPer <numeric_value>
OUTPut:RECorder[1]:STATe <boolean>
OUTPut:ROSCillator[:STATe] <boolean>
328
337
338
329
331
333
335
327