Keysight N432A Programming Manual page 331

OUTPut:RECorder[1]:LIMit:AUTO <boolean>
This command enables or disables autoscaling for the recorder output. Presetting
the N432A disables the autoscaling.
Syntax
OUTP
:REC
Example
OUTP:REC:LIM:AUTO 1
Query
OUTPut:RECorder[1]:LIMit:AUTO?
This query enters a 1 or 0 into the output buffer indicating whether autoscaling is
enabled or disabled for the recorder output:
– 1 is returned when autoscaling is enabled.
– 0 is returned when autoscaling is disabled.
Query example
OUTP:REC:LIM:AUTO?
Keysight N432A Programming Guide
1 :LIM
Queries the current autoscaling state for the
recorder output.
Space
:AUTO
This command enables autoscaling for the
recorder output.
OUTPut Subsystem
0|OFF
1|ON
?
11
331