– The trigger source is set to IMMediate on instrument power up and when
NOTE
– The MEASure and CONFigure commands automatically set the trigger source
– The READ? query or MEASure command should not be used if the trigger
Example
TRIG:SOUR IMM
Reset condition
On reset, the trigger source is set to IMMediate.
Query
TRIGger[1]:SOURce?
This query returns the current trigger source of either IMM, BUS, or HOLD.
Query example
TRIG:SOUR?
Keysight N432A Programming Guide
entering local mode.
to IMMediate.
source is set to BUS or HOLD.
This command configures the N432A for immediate
triggering.
Queries the N432A trigger source.
TRIGger Subsystem
16
487