Keysight N432A Programming Manual page 489

Reset condition
On reset, this command is set to ON.
Query
TRIGger[:SEQuence[1]]:DELay:AUTO?
This query enters a 1 or 0 into the output buffer indicating the status of
TRIGger[:SEQuence[1]]:DELay:AUTO.
– 1 is returned when it is enabled.
– 0 is returned when it is disabled.
Query example
TRIG:DEL:AUTO?
Keysight N432A Programming Guide
Queries the state of the N432A settling-time delay.
TRIGger Subsystem 16
489