Keysight N432A Programming Manual page 396

13 SERVice Subsystem
SERVice:FAN:FULL <boolean>
This command sets the fan controller to run at full speed. At the first power up,
the default state is ON. If the state is set to OFF and power is cycled, the state will
be saved. On the next power cycle, the state will be set to OFF.
Syntax
Examples
SERV:FAN:FULL 1
SERV:FAN:FULL OFF
Query
SERVice:FAN:FULL?
This query returns the current state of the fan controller.
Query example
SERV:FAN:FULL?
396
SERV
:FAN
Space
:FULL
This command sets the fan controller to run at full
speed.
This command turns off the fan controller.
Queries whether the fan controller is turned on or off.
0|OFF
1|ON
?
Keysight N432A Programming Guide