Keysight N432A Programming Manual page 410

14 STATus Subsystem
:ENABle <NRf>|<non-decimal numeric>
This command sets the Enable register of a particular SCPI register set you require
to control. The parameter value, when rounded to an integer and expressed in
base 2 has its first 15 bits written into the Enable register of the specific SCPI
register set. The last bit (bit 15) is always set to 0.
Syntax
Parameters
Item
NRf
non-decimal numeric
Query
:ENABle?
This query returns a 15-bit decimal-weighted number representing the contents
of the Enable register of the SCPI register set being queried. The return format is
<NR1> in the range of 0 to 32767 (2
410
Space
:ENAB NRf
non-decimal numeric
?
Description
The value used to set the Enable register
15
–1).
Keysight N432A Programming Guide
Range of values
15
0 to 2 –1