Keysight N432A Programming Manual page 482

Thermistor power meter

Hide thumbs Also See for N432A:

Table of Contents

TRIGger Subsystem

TRIGger Commands

TRIGger commands control the behavior of the trigger system.

The following commands are described in this section:

TRIGger[1]:DELay:AUTO <boolean>

TRIGger[1][:IMMediate]

TRIGger[1]:SOURce BUS|HOLD|IMMediate

TRIGger[:SEQuence[1]]:DELay:AUTO <boolean>

TRIGger[:SEQuence[1]]:IMMediate

TRIGger[:SEQuence[1]]:SOURce BUS|HOLD|IMMediate

Keysight N432A Programming Guide