Keysight N432A Programming Manual page 264

6 DISPlay Subsystem
DISPlay[:WINDow[1]|2]:FORMat <character_data>
This command selects the display format of the selected window.
Syntax
Parameter
Item
character_data
Example
DISP:WIND2:FORM DIG
Reset condition
On reset, the upper window is set to a digital display and the lower window is set
to an analog display.
264
DISP :WIND
Description/Defaul t
Sets the window display format:
– DIGital: Sets the window to a digital display. This
setting is the same as SNUMeric.
– ANALog: Sets the window to an analog display using the
currently selected measurement.
– SNUMeric: Sets the window to a single numeric display.
The currently selected measurement is displayed. This
setting is the same as DIGital.
– DNUMeric: Sets the window to a dual numeric display.
:FORM
1
2
This command sets the lower window to a digital
display.
Keysight N432A Programming Guide
Space
character_data
?
Range of values
DIGital
ANALog
SNUMeric
DNUMeric