Keysight N432A Programming Manual page 394

13 SERVice Subsystem
SERVice:DISPlay:BSCReen:SECure:DEACtivation <numeric_value>
This command deactivates the secure blank feature with the 6-digit user-defined
password that was used to activate the secure blank feature. You are allowed up
to three attempts to deactivate using the correct password; failing which you will
only be allowed to retry deactivation after two hours.
The retry timer is a 2-hour duration with the N432A turned on. If the N432A is
NOTE
turned off at any time within this duration, the retry timer will be restarted.
Syntax
SERV
:DISP
Parameter
Type
numeric_value
Remark
This command is only effective when the secure blank feature is activated.
Example
SERV:DISP:BSCR:SEC:DEAC "123456" This command restores the screen if
394
:BSCR :SEC
Description/Defaul t
A 6-digit password to deactivate the secure blank feature "000000" to "999999"
:DEAC Space
the correct 6-digit password has been
entered.
Keysight N432A Programming Guide
numeric_value
Range of values