Keysight N432A Programming Manual page 302

Thermistor power meter

Hide thumbs Also See for N432A:

Table of Contents

MEMory Subsystem

MEMory[:METer][1]:CLEar Commands

These commands are used to remove the contents stored in the sensor calibration

tables, frequency-dependent offset tables, and save/recall registers. This

subsystem removes the data contents but does not affect the name of the

associated table or save/recall register.

The following commands are detailed in this section:

MEMory[:METer][1]:CLEar[:NAME] <character_data>

MEMory[:METer][1]:CLEar:TABLe

The contents cleared using these commands are non-recoverable.

Keysight N432A Programming Guide