Table of Contents
Advertisement
12
SENSe Subsystem
[SENSe[1]:]CORRection:GAIN2:STATe <boolean>
This command is used to enable or disable a channel offset for the N432A setup.
The [SENSe[1]:]CORRection:GAIN2[:INPut][:MAGNitude] command is used to
enter the loss/gain value.
Syntax
SENS
1
Example
CORR:GAIN2:STAT ON
Reset condition
On reset, the channel offset is disabled.
Query
[SENSe[1]:]CORRection:GAIN2:STATe?
This query enters a 1 or 0 into the output buffer indicating the status of the
channel offset:
– 1 is returned if a channel offset is enabled.
– 0 is returned if a channel offset is disabled.
Query example
CORR:GAIN2:STAT? Queries whether a channel offset is enabled or disabled.
374
:
:GAIN2
CORR
:STAT
Space
This command enables a channel offset.
Keysight N432A Programming Guide
0|OFF
1|ON
?
Advertisement
Table of Contents
