Keysight N432A Programming Manual page 378

12 SENSe Subsystem
Example
FREQ 500kHz
Reset condition
On reset, the frequency is set to 50 MHz.
Query
[SENSe[1]:]FREQuency[:CW|:FIXed]? [MIN|MAX]
This query returns the current frequency setting or the values associated with MIN
and MAX. The unit in which the results are returned is Hz.
Query example
FREQ?
378
This command sets the frequency to 500 kHz.
Queries the current frequency setting.
Keysight N432A Programming Guide