Keysight N432A Programming Manual page 222

4 CALCulate Subsystem
CALCulate[1]|2|3|4:GAIN:STATe <boolean>
This command is used on the specified window/measurement to enable or disable
the display offset set by the CALCulate[1]|2|3|4:GAIN[:MAGNitude] command.
Syntax
Example
CALC2:GAIN:STAT 1
Reset Condition
On reset, the gain is disabled.
Query
CALCulate[1]|2|3|4:GAIN:STATe?
This query enters a 1 or 0 into the output buffer indicating the status of the display
offset.
– 1 is returned when the display offset is enabled
– 0 is returned when the display offset is disabled
222
CALC 1
2
3
4
:GAIN :STAT
This command enables the display offset for the
lower window/upper measurement.
Space
0|OFF
1|ON
?
Keysight N432A Programming Guide