Keysight N432A Programming Manual page 387

SERVice:BIST:V0 <boolean>
This command enables or disables the V
Syntax
Reset condition
On reset, the V
Example
SERV:BIST:V0 ON
Query
SERVice:BIST:V0?
This query enters a 1 or 0 into the output buffer indicating the status of the V
self-test:
– 1 is returned if the self-test is enabled.
– 0 is returned if the self-test is disabled.
Query example
SERV:BIST:V0?
Keysight N432A Programming Guide
SERV :BIST
self-test is enabled.
0
self-test.
0
Space
:V0
This command enables the V
Queries whether the V
SERVice Subsystem
0|OFF
1|ON
?
self-test.
0
self-test is enabled or disabled.
0
13
0
387