Keysight N432A Programming Manual page 360

12 SENSe Subsystem
[SENSe[1]:]CORRection:CSET2[:SELect] <string>
This command enters the name of the required frequency-dependent offset table.
If [SENSe[1]:]CORRection:CSET2:STATe is set to OFF, the selected
NOTE
frequency-dependent offset table is not being used.
Syntax
SENS
1
Parameter
Item
string
Example
CORR:CSET2 'PW1'
Reset condition
On reset, the selected table is not affected.
360
:
:CSET
CORR
Description/Defaul t
String data representing a
frequency-dependent offset table name
2
Range of values
Any existing table name
(Existing table names can be listed using
MEMory:CATalog:TABle?).
This command enters the name of the
frequency-dependent offset table as PW1.
Keysight N432A Programming Guide
Space
:SEL
?
string