Keysight N432A Programming Manual page 333

OUTPut:RECorder[1]:LIMit:LOWer <numeric_value>
This command sets the minimum scaling value for the recorder output. The unit
used is dependent on the unit currently set for the CALC block specified in
OUTPut:RECorder[1]:FEED <data_handle>.
Syntax
OUTP
:REC
Parameter
Item
numeric_value
Example
OUTP:REC:LIM:LOW –90
Reset condition
On reset, the minimum scaling value is set to –150 dBm.
Keysight N432A Programming Guide
:LIM
1
Description/Defaul t
A numeric value for the minimum scaling value. The unit
used, dBm, W, or %, is dependent on the unit currently set
for the CALC block specified in
OUTPut:RECorder[1]:FEED <data_handle>.
Space
:LOW
This command sets the minimum scaling value to
–90 dBm for the recorder output.
OUTPut Subsystem
numeric_value
?
Range of values
–150 to +230 dBm
1 aW to 100 XW
0% to 999%
11
333