Keysight N432A Programming Manual page 355

Example
CORR:GAIN 100 PCT
Reset condition
On reset, CFACtor|GAIN1 is set to 100%.
Query
[SENSe[1]:]CORRection:CFACtor|GAIN[1][:INPut][:MAGNitude]?
[MIN|MAX]
This query returns the current gain correction setting or the values associated with
MIN and MAX.
Query example
CORR:GAIN?
Error message
If the [SENSe[1]:]CORRection:CFACtor|GAIN1 command is used with a sensor
calibration table selected, error –221,"Settings Conflict" occurs.
Keysight N432A Programming Guide
This command sets a gain correction of 100%.
Queries the current gain correction setting.
SENSe Subsystem 12
355