Keysight N432A Programming Manual page 212

4 CALCulate Subsystem
CALCulate Subsystem
The CALCulate subsystem provides the commands to configure the parameters
used in post-acquisition data processing. Functions in the SENSe subsystem are
related to data acquisition, while the CALCulate subsystem operates on the data
acquired by a SENSe function.
There are four independent CALCulate blocks in the N432A; two for each window,
as shown in the figure below. The numeric suffix of the CALCulate command
determines which CALCulate block is used and where the measurement result is
displayed.
Figure 4-1
Data from the SENSe block may feed any or all of the CALCulate blocks via the
MATH command.
CALCulate block.
212
CALC1
upper window/upper measurement
CALC3
upper window/lower measurement
CALC2
lower window/upper measurement
CALC4
lower window/lower measurement
Measurement display CALCulate block window
Figure 4-2 details where the commands are applied with in the
Keysight N432A Programming Guide