Keysight N432A Programming Manual page 235

CALCulate[1]|2|3|4:LIMit:STATe <boolean>
This command enables or disables the test limits for the specified window/
measurement.
Syntax
Example
CALC:LIM:STAT 1
Reset condition
On reset, limit checking is disabled.
Query
CALCulate[1]|2|3|4:LIMit:STATe?
This query enters 1 or 0 into the output buffer indicating the status of the
limit-checking function for the specified window/measurement.
– 1 is returned if limit checking is enabled.
– 0 is returned if limit checking is disabled.
Keysight N432A Programming Guide
CALC 1
2
3
4
:STAT
:LIM
This command enables the limit-checking function for
the upper window/upper measurement.
CALCulate Subsystem
Space 0|OFF
1|ON
?
4
235