Keysight N432A Programming Manual page 338

11 OUTPut Subsystem
OUTPut:ROSCillator[:STATe] <boolean>
This command enables or disables the POWER REF output.
Syntax
Example
OUTP:ROSC:STAT 1
Reset condition
On reset, the POWER REF output is disabled.
Query
OUTPut:ROSCillator[:STATe]?
This query enters a 1 or 0 into the output buffer indicating whether the POWER
REF output is enabled or disabled.
– 1 is returned when the POWER REF output is enabled.
– 0 is returned when the POWER REF output is disabled.
Query example
OUTP:ROSC?
338
OUTP :ROSC
Queries the status of the POWER REF output.
Space
:STAT
This command enables the POWER REF output.
Keysight N432A Programming Guide
0|OFF
1|ON
?