Table of Contents
Advertisement
:NTRansition <NRf>|<non-decimal numeric>
This command sets the Negative Transition register of the SCPI register set you
require to control. The parameter value, when rounded to an integer and
expressed in base 2 has its first 15 bits written into the Negative Transition
register of the specific SCPI register set. The last bit (bit 15) is always set to 0.
Syntax
Parameters
Item
NRf
non-decimal numeric
Query
:NTRansition?
This query returns a 15-bit decimal-weighted number representing the contents
of the Negative Transition register of the SCPI register set being queried. The
return format is <NR1> in the range of 0 to 32767 (2
Keysight N432A Programming Guide
Space
:NTR
Description
The value used to set the NTR register
NRf
non-decimal numeric
?
15
STATus Subsystem
Range of values
15
0 to 2
–1
–1).
14
411
Advertisement
Table of Contents
