Table of Contents
Advertisement
MEMory[:METer][1]:CLEar:TABLe
This command is used to clear the contents of the table currently selected using
MEMory:TABLe:SELect. Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as the table contents
are empty.
This command is an alternative form of the MEMory:CLEar[:NAME] command. The
difference is the method in which the table is selected.
The contents cleared using this command are non-recoverable.
NOTE
Syntax
Example
MEM:CLE:TABL
Error message
If no table is selected, error –221,"Settings conflict" occurs.
Keysight N432A Programming Guide
MEM
:MET
:CLE
1
This command clears the contents of the currently
selected table.
MEMory Subsystem
:TABL
10
305
Advertisement
Table of Contents
