E-Rds-Related Setting Items; E-Rds Setting Items - Canon imageRUNNER ADVANCE 8105 Series Service Manual

2
Technology > Embedded RDS > E-RDS Setup > E-RDS-related setting items
4. Touch the [Close] button.
5. Reboot the device.
CAUTION:
When changes are made to the above-mentioned network settings, be sure to reboot
the device.
2
Technology > Embedded RDS > E-RDS Setup > E-RDS-related setting items
■

E-RDS-related setting items

●

E-RDS setting items

E-RDS
([Lv.1] COPIER > Function > INSTALL)
RGW-ADR
([Lv.1] COPIER > Function > INSTALL)
RGW-PORT
([Lv.1] COPIER > Function > INSTALL)
F-2-317 F-2-317
COM-TEST
([Lv.1] COPIER > Function > INSTALL)
COM-LOG
([Lv.1] COPIER > Function > INSTALL)
ERDS-DAT
([Lv.1] COPIER > Function > CLEAR)
CA-KEY
([Lv.2] COPIER > Function > CLEAR)
Item
Set use/no use of E-RDS function
0: Function not used / 1: Function used
e-Maintenance/ imageWARE Remote system to send
device information, counter data, error statuses to the
UGW.
Default : 0 (Function not used)
URL setting of UGW
Max 128 characters
Default : https://a01.ugwdevice.net/ugw/agentif01
Set port number of UGW
Validation : 1 to 65535
Default : 443
Execution of a communication test with UGW / Display of
the result
Perform Communication test with UGW and set "OK!" or
"NG!" as the result.
Display of detailed information about a communication
error with UGW
Error information of a connection failure with UGW is
displayed.
Error occurrence date and time, error code, and detailed
error information are displayed.
Max 30 latest loggings retained
Max 128 characters for Error information.
Initialization of E-RDS SRAM data
Initialization of CA certificate
When the power is turned OFF/ON after execution, the CA
certificate in the factory setting is automatically installed.
2-224
Description
T-2-114 T-2-114
2-224