Table of Contents
Advertisement
MB CHAPTER 1 GENERAL (INTRODUCTION
Sa
F. User Mode Menu
1. Setting Menus and Parameters
Follow the procedure below to set printer menus and parameters.
1)
Press the MENU key to set the printer to the menu mode.
2) Select the desired menu item by pressing the Up or Down arrow key.
-— CAUTION
Menus that are displayed vary according to the offline or pause mode.
3) Select the desired parameter by pressing the Right or Left arrow key.
4) To fix a parameter setting, press one of the ONLINE, MENU, Up or Down arrow keys.
CAUTION
In the case of menus that are immediately executed such as "Head Cleaning", "Adjustment" or "Setup
List", the operation is started by pressing one of the ONLINE, MENU or Down arrow keys. However,
note that when the Up arrow key is pressed, the operation is not started, and the selected parameter
will be canceled.
2. Details of User Mode Menus
;
The following table shows the configuration of user mode menus on this printer.
(Bold lettering indicates factory settings.)
Menu Name
Parameter Name/Function
Remarks
Version
Displays the version of the engine controller and image controller.
Auto Gut
Sets automatic cutting to ON or OFF after roll media has been
printed.
Yes
Cut after end of printing
No
Do not cut after end of printing
Cut Line
Print a cutting line after the end of printing.
Head Cleaning
| This menu allows you to manually clean cartridges.
No
The head cleaning is not carried out.
All cartridges are not cleaned.
The Black cartridge is cleaned.
Table 1-303 (1/3)
Advertisement
Table of Contents
