Port Setup Procedure Of Https Server - Canon imageRUNNER ADVANCE 8105 Series Service Manual

2
Technology > MEAP > Setting HTTP port for MEAP application (level 2) > Port setup procedure of HTTPS Server
4) Press the port number to specify on the control panel (the numerical value input in the field
is displayed), and press [OK] button.
5) Check to see that it is reflected in setting field, and turn off the main power, and then,
restart the device.
2
Technology > MEAP > Setting HTTP port for MEAP application (level 2) > Port setup procedure of HTTPS Server
■
1) Startup level 2 of [SERVICE MODE] . The start procedure of [SERVICE MODE] level2 is
2) Press [COPIER] >[Option] > [NETWORK] buttons.
3) Press
F-2-292 F-2-292
F-2-293 F-2-293

Port setup procedure of HTTPS Server

as follows.
1. Press [Settings /Registration] button n control panel.
2. Press [2] button and [8] button at the same time on control panel.
3. Press [Settings /Registration] button.
4. [SERVICE MODE] screen is displayed.
5. Press [Settings /Registration] button.
6. Press [2] button.
or button until [MEAP-SSL] is shown on the screen. Press [MEAP-SSL]
button.
2-208
F-2-294 F-2-294
2-208