2-2. Adjustment
Adjustment
Destination settings
(EEPROM settings)
Ink absorber counter
resetting
(EEPROM settings)
Ink absorber counter
value setting
(EEPROM settings)
Grease application
2-3. User Mode
Function
Nozzle check pattern
printing
Print head cleaning
Print head deep
cleaning
Automatic print head
alignment (See 3-4,
"Print Head
Alignment.")
Manual print head
alignment (See 3-4,
"Print Head
Alignment.")
Print head alignment
value printing
Purpose
To set the printer destination.
- At logic board ass'y replacement
To reset the ink absorber counter.
- At ink absorber replacement
To set the data of the actual ink amount
absorbed in the ink absorber to the
EEPROM.
- At logic board ass'y replacement
To maintain sliding properties of the
applicable portions.
- At carriage unit replacement
Procedures
Perform from the printer driver
Maintenance tab, or via the
machine operation panel.
Perform from the printer driver
Maintenance tab, or via the
machine operation panel.
Perform from the printer driver
Maintenance tab, or via the
machine operation panel.
Perform via the machine
operation panel.
Perform from the printer driver
Maintenance tab.
Perform from the printer driver
Maintenance tab, or via the
machine operation panel.
Service Tool,
Set Destination section
Service Tool,
Clear Ink Counter section
Service Tool,
Ink Absorber Counter section
Using a brush, etc., apply FLOIL
KG-107A. See 2-5, Grease
Application, for details.
Remarks
Set a sheet of plain paper (A4 or Letter) in the
front tray.
If there is a missing portion or white streaks in
the nozzle check pattern printout, perform this
cleaning, to unclog the print head nozzles, and
to keep the print head conditions good.
If print head cleaning is not effective, perform
this cleaning. Since the deep cleaning
consumes more ink than regular cleaning, it is
recommended to perform deep cleaning only
when necessary.
To correct the dot placement accuracy.
- At ink cartridge replacement
- At logic board ass'y replacement
- When the print quality is not satisfying, etc.
To confirm the current print head alignment
values.
(17/34)
easyfixs.blogspot.com
Method
Approx. time
1 min.
1 min.
1 min.
1 min.
Approx.
time
1 min.
1 min.
1.5 min.
4 min.
6 min.
1 min.