Subaru Legacy 2003 Service Manual page 2700

6) Remove right and left holders with ST.
ST 399780111 WRENCH
ST
7) Pull out differential assembly from differential
case.
NOTE:
Be careful not to hit the teeth against the case.
8) Remove bearing race from right and left holders
with ST1 and ST2.
ST1 499705401 BEARING OUTER RACE
PULLER ASSY
ST2 499705404 OUTER RACE PULLER
SEAT
( A )
(A) Bearing race
(B) Holder
REAR DIFFERENTIAL FOR VA-TYPE
DI-00133
DI-00134
ST1
ST2
( B )
DI-00135
DI-45
9) Remove oil seal from right and left holders with
screwdriver.
10) Extract bearing cone with ST1 and ST2.
NOTE:
• Do not attempt to disassemble the parts unless
necessary.
• Set puller so that its claws catch the edge of the
bearing cone.
• Never mix up the right and left hand bearing rac-
es and cones.
ST1 899524100 PULLER SET
ST2 399520105 SEAT
11) Remove crown gear by loosening crown gear
bolts.
DIFFERENTIALS
DI-00136
ST1
ST2
DI-00137
DI-00068