Intermec ColorCoder V4 Service Manual page 41

2.2 Image Formation System, cont'd.
2.2:C Recovery Unit, cont'd.
Intermec ColorCoder V4 – Service Manual Ed. 1
Outline of Operation, cont'd.
Operation of Head Holder Unit
The head holder unit is driven by the head motor. The position of
the head holder unit is detected by the head position sensor 1
whether or not it is in the reference position (wipe position), and the
movement of the unit from that position to the predetermined
position is controlled by the number of pulses driving the head
motor. However the evacuated position is detected by the head
position sensor 2.
• Evacuation position to which the head evacuates when the
restoration tub is moved.
• Wipe position
Position of head wipe operation
• Preliminary discharge position
Position of preliminary discharge
• Capping position
Position of capping and pressurizing
• Printing position
Position of printing
Operation of Restoration Tub Unit
The restoration tub unit is driven by the cap motor. The capping
position and the evacuated position of the restoration tub unit are
sensed by the cap position sensor 1 and the cap position sensor 2.
• Capping position
Position of preliminary discharge, capping, and pressurizing
• Evacuated position
Position of printing
Chapter 2 Operation and Timing
40