Intermec ColorCoder V4 Service Manual page 135

3.4 Pick Up/Feeder System, cont'd.
3.4:B Feeder Unit, cont'd.
Intermec ColorCoder V4 – Service Manual Ed. 1
Detaching the PHS Locking Unit
1. Remove the two screws (1) and detach the PHS locking unit (2).
2. Disengage the spring (1) and remove the E-ring (2), remove the
two mounting screws (4) of the solenoid (3) and the spring pin
(5), and detach the solenoid out of the locking hook (6).
Chapter 3 Mechanical System
1
2
Figure 3-97
2
1
6
Figure 3-98
3
5
4
134