3.4 Pick Up/Feeder System, cont'd.
3.4:A Roll Unit, cont'd.
Intermec ColorCoder V4 – Service Manual Ed. 1
Removing the Roll Drive Unit, cont'd.
Removing the Roll Motor
1. Remove the connector J63 (2) of the roll motor (1).
2. Remove the grip ring (2) from the roll motor drive gear (1) and
detach the gear.
3. Remove three mounting screws (4) from the roll motor (5) and
detach the motor.
Chapter 3
1
2
Figure 3-83
4
1
3
Figure 3-84
Mechanical System
2
126