3.3 Ink Supply System, cont'd.
3.3:B Pump Unit, cont'd.
Intermec ColorCoder V4 – Service Manual Ed. 1
Detaching the Pump Unit, cont'd.
11. Remove the two mounting screws (2) from the pump unit (1),
and detach the lower ink room (3) by pulling it toward you.
1
Caution:
Do not tilt the pump unit more than necessary, because the ink in the pump unit
may leak out of the unit.
12. Remove the two mounting screws (2) from the lower ink room
(1), and detach the pump unit from the lower ink room.
1
Chapter 3
Mechanical System
3
Figure 3-64
Figure 3-65
2
2
113