Intermec ColorCoder V4 Service Manual page 139

3.4 Pick Up/Feeder System, cont'd.
3.4:B Feeder Unit, cont'd.
Intermec ColorCoder V4 – Service Manual Ed. 1
Detaching the Feed Belt and Roller, cont'd.
1. As for the driven roller (1) on the pick up side, remove the E-ring
(2) and the pin (3), remove the askew feed pulleys (4), remove
the E-ring (5), and detach the whole bearing (6).
Remove the E-ring (8), and detach the drive roller (7) on the
delivery side along with the bearing (9).
8
9
7
Chapter 3 Mechanical System
4
2
6
5
Figure 3-105
3
1
138