Intermec ColorCoder V4 Service Manual page 179

5.3 Maintenance, cont'd.
No. Item
1 Check the head absorber and
blade. Disassemble and clean
around the recovery unit.
Intermec ColorCoder V4 – Service Manual Ed. 1
Description
Remove BJ head, clean around the head, the blade and the
restoration tub with lint-free sponge to remove waste ink splashed
over. Large volume of waste ink stained into specially the BJ head
absorber (1) or the blade cleaner (2) [the absorber] in the restoration
tub is to be sucked with the pump set.
2
Chapter 5 Maintenance and Servicing
1
Figure 5-5
2
Figure 5-6
Interval
after printing
700,000 –
1,000,000 sheets
178