Show System Environment - Allied Telesis AR2050V Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM ENVIRONMENT

show system environment
Overview This command displays the current environmental status of your device and any
attached PSU, XEM, or other expansion option. The environmental status covers
information about temperatures, fans, and voltage.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system environment
Syntax
Mode User Exec and Privileged Exec
Example To display the system's environmental status, use the command:
awplus#
Output Figure 6-16: Example output from show system environment
awplus#show system environment
Environment Monitoring Status

Overall Status: ***Fault***

Resource ID: 1 Name: AR4050S
ID Sensor (Units)
1 Fan: Fan (Rpm)
2 Voltage: 2.5V (Volts)
3 Voltage: Battery (Volts)
4 Voltage: 3.3V (Volts)
5 Voltage: 5.0V (Volts)
6 Voltage: 12V (Volts)
7 Voltage: 0.92V (Volts)
8 Temp: Internal (Degrees C)
Related show system
Commands
C613-50186-01 Rev B
C
ONITORING OMMANDS
show system environment
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Reading Low Limit High Limit Status
3516 2411
2.461 2.344
1.181 2.700
3.266 2.973
4.974 4.505
11.563 10.813
0.844 0.872
32 58(Hyst)
"Getting Started
Guide.
- Ok
2.865 Ok
3.586 FAULT
3.627 Ok
5.495 Ok
13.188 Ok
0.970 FAULT
65 Ok
256