Show System Interrupts - Allied Telesis AR2050V Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM INTERRUPTS

show system interrupts
Overview Use this command to display the number of interrupts for each IRQ (Interrupt
Request) used to interrupt input lines on a PIC (Programmable Interrupt Controller)
on your device.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system interrupts
Syntax
Mode User Exec and Privileged Exec
Example To display information about the number of interrupts for each IRQ in your device,
use the command:
awplus#
Output Figure 6-17: Example output from the show system interrupts command
awplus#show system interrupts

CPU0
8: 151378
16: 0
25: 256
26: 0
41: 946096
51: 0
53: 0
59: 1025
60: 5825
61: 3
63: 0
65: 0
...
Related show system environment
Commands
C613-50186-01 Rev B
C
ONITORING OMMANDS
show system interrupts
CPU1
152020 Core Enabled
0 CIU Enabled
0 CIU-W Enabled
256 CIU-W Enabled
947120 CIU-M Enabled
0 CIU Enabled
0 CIU Enabled
0 CIU Enabled
0 CIU Enabled
0 CIU Enabled
0 CIB Enabled
0 CIU-GPIO Enabled
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
0 timer
0 Ethernet
0 octeon_wdt
0 octeon_wdt
0 SMP-IPI
0 RGMII
0 Ethernet
0 serial
0 i2c-octeon
0 i2c-octeon
0 xhci-hcd:usb1
0 0-0021
"Getting Started
Guide.
257